Kú Cycle TF1 vs Felt iA

Kú Cycle TF1 vs Felt iA Henk Galenkamp

Product Comparison Test – Friday 1 March 2024 – Almere, Netherlands

We question products and processesand we are always looking for new ways todeliver athlete performance gains.

Almere, Netherlands

In May 2022, Henk Galenkamp came to test the efficiency of his Felt iA vs our TF1.

Kú Cycle teamed up with AeroLab to run these tests for the most accurate data results. The AeroLab device collects 5000 data points every second at a 40 Kph average. That’s over 22.5 million data points!

The test consisted of multiple 800m laps on both bikes, measuring CdA, power (watts), average speed and wind.

We are data driven, committed to solid research and we let the numbers do the talking…

KÚ CYCLE COMPARISON AERO TEST

The data below are the results based on the following conditions:
The athlete riding at an average speed of 38-40 Kph with an average power of 280 Watts
An average wind speed of 39 Kph at a Yaw of 3°

CONCLUSION

The tests performed for the Felt iA and Kú TF1 were based on the standard Kú aero testing protocols

The Kú TF1
demonstrates a CdAsaving
of 14% against the Felt iA

The Kú TF1
saves the rider 20 wattsof power
compared to the Felt iA

Over a full Ironman the rider will
reduce the bike split by 15 minutes
compared to the Felt iA

The Kú TF1 demonstrates a CdA saving of 14% against the Felt iA over multiple aero tests. The Felt’s average CdA was 0.244 which was reduced on the Kú TF1 to 0.209 measured in the same conditions.

Over a full Ironman distance riding at 38-40 Kph the Kú TF1 saves the rider 20 watts of power compared to the Felt iA.

Over a full Ironman distance riding at a constant normalised power of 280 watts, the rider will gain an average of 2 Kph on the TF1 compared to riding the Felt, reducing the bike split by 15 minutes.

SCHEDULE YOUR MEETING
RESERVE YOUR ONLINE MEETING WITH US

For Sales Enquiries:

Ed Grace
ed@ku-cycle.com
+44 7894 307395

Media Contact Kú Cycle:

Alex Bok
alex@ku-cycle.com
+31 (0) 683 033 920

About Kú Cycle
A Dutch based company with a mission to design bikes and performance solutions that will change the sport forever – the perfect fit between body and machine. We believe a rider’s position should be established independent of the bike and will therefore reposition bike fitting services from a post-purchase service to a pre-purchase service. A new production process (built-to-order) and a completely different sales model are introduced with a single objective: athlete performance delivered!